| MODERN DESIGN | This next generation motion detector has a clean and modern profile with a classic UFO shape. The body housing is made with premium polycarbonate material stronger than ABS plastic and gives a beautiful smooth finish. Standard white low profile allows this sensor to blend seamlessly into your ceiling.

| MICROWAVE RADAR | Our microwave sensor emits microwave signals to detect moving object, the same way a radar speed detector works. It is more accurate and consistently outperforms a PIR motion sensor, which tends to be less sensitive in high temperature and over sensitive in low temperature.

| FULL DETECTION CAPABILITY | Features 360-degree detection with 30-ft diameter detection range. Radar waves are capable of penetrating glass, paper, plastic and thin walls. Compared with a PIR motion sensor, a radar motion detector is less likely to be limited by place of installation, and could detect objects before they see the sensor.

| PHOTOCELL ENABLED | With built in photocell operated by switch for daylight (24/7 mode) or night mode (only trigger after dark), making the sensor a perfect replacement of PIR sensors.

| SAFE TO USE | This sensor emits microwave power at 10 milliwatt, which is 1/100 of a normal cell phone (typically 1-2 watts of power). Suggested install height is 8-12 ft., compared to a cellphone which is normally used within 3 ft. You can use this radar motion detector safely and with peace of mind. Please review wiring diagram to make sure wiring is done correctly.